尊龙旗舰app-尊龙旗舰厅app

尊龙旗舰app-尊龙旗舰厅app

钓鱼卷

OKUMA FISHING TACKLE is a global leader in the design and manufacturing of high quality fishing tackle.

尊龙旗舰厅app

OKUMA FISHING's 钓鱼竿 and 卷 Manufacturing

尊龙旗舰app.有限公司., since 1986, is a fishing rods and reels manufacturer based in 台湾. 奥库马垂钓致力于为每个人提供最佳的垂钓体验, 同时也为尊龙旗舰厅app的垂钓者们创造最好的鱼线和鱼竿, 哪些是轻量级和精确的.

OKUMA FISHING提供质量和负担得起的钓鱼竿,如苍蝇杆, 浮动棒, spinning rods; fishing reels including spinning, baitcast, 恶意破坏, 和飞卷. They are all made with advanced materials with dynamic designs.

大隈渔具是您淡水和咸水钓鱼的最佳选择. 拥有先进的技术和超过31年的渔具供应经验, OKUMA FISHING delivers excellent quality fishing rods and reels in order to meet each customer's demands.

钓鱼卷

  • 如何制作大隈钓鱼卷轴?

    卷 are a vital element in any anglers fishing success. 使用可靠的卷轴时,你可以享受钓鱼,而不是害怕它. To improve confidence in any braking and gearing system anglers must first understand the reel production process.


  • [选择]如何选择卷筒和杆

    1. 确定目标物种. 2. Determine which line/lures you are using to target these species. 3. Choosing the ideal reel and rod for this type of fishing. 纺丝盘配纺丝棒,铸造盘配铸棒. 例如: Targeting bass - using lure: about 1/4~1oz, line: about 10-20lb 推荐选择低音杆:Helios HS-C-701MH和Cerros低调诱饵卷轴.或者去当地的钓具店选购.


  • [Product info] Do the spinning reels come with spare spools?

    Check the catalog, if there is the info of extra spool, it means that reel comes with a spare spool.


  • (故障排除)线

    1. 线绕在线轴上没有正确. 2. Wind the line slowly and makesure line is straight.


  • 【尊龙旗舰厅app】铸造时线缠结

    旋转盘: 1. 线轴充线过多. 2. 对卷轴使用太大的线尺寸. 3. 内存设置在线. Solution: Refer to the line specification we have suggestted for each reel and re-spool with new line.铸造卷: 线绕在线轴上没有正确. Re-spool线.


  • [Troubleshooting] Bail will not close correctly

    旋转盘: 1. 银线弯曲变形了. 2. 保释压缩弹簧断裂或薄弱. 3. Dirt or lack of lubrication in bail arm assemblies. Solution: Replace bail wire or bail compression spring. 清洁和上油的手臂组件.


  • 【尊龙旗舰app】无阻力

    旋转盘: 拖曳垫圈磨损,更换垫圈或送至大隈维修中心.


  • [Troubleshooting] Gears feel rough under pressure.

    1. 齿轮缺少润滑或损坏. 2. 轴承缺乏润滑或损坏. Solution: Re grease or replace the damage part.


  • [Troubleshooting] The handle spins backwards on hookset.

    1. 防反向轴承损坏. 更换防反向轴承. 2. 滚筒油擦得太多了. 清洗轴承上的油.


  • [Troubleshooting] Line does not stack correctly on

    旋转盘: Use provided click gear washers to adjust spool height on the reel. If the line is too high on the spool add a click gear washer. 如果温度太低,则拆卸齿轮垫圈.


  • 【尊龙旗舰app】阻力不平滑.

    Lack of grease on the drag washer or drag washer soaked with oil. 更换拖曳垫圈或重新涂油.


  • 【尊龙旗舰app】卷轴在铸造时会发出噪音,铸造的距离没有以前那么远.

    铸造卷: 速度控制系统太干或磨损. 油芯盖板. 6-pin centrifugal braking system is worn, replace it.


  • [Troubleshooting] Line guide on level wind does not work.

    铸造卷: 1. Line guide pawl and worm shaft are worn or damaged. 2. 线导向爪盖松动. 3. 水平风销可能损坏. 处理步骤:更换损坏的部件.


  • [故障排除]铸件的卷筒反弹

    铸造卷: 1. 阀芯张力旋钮未调好. 2. Magnetic Control System is not adjusted properly. 3. Velocity Control System is not adjusted properly.


  • [故障排除]我的投饵盘上的线负载在线轴的一侧.

    铸造卷: If you reel line with your rod pointed toward the right, the line will load up higher on the left side of the spool. If your rod is pointed to the left while reel line in, the line will load higher on the right side of the spool. A simple solution to this problem is to keep your rod and line parallel to each other whenever possible.


  • [Troubleshooting] Spool will not rotate when handle is turned

    铸造卷: Star Drag is not tight enough to activate spool.


  • 【尊龙旗舰app】拇指杆-当手柄转动时,按钮无法重新啮合

    铸造卷: 1. Broken Thumb bar or Push button return spring. 2. Dirty or under lubricated clutch return system. 3. 离合器回臂磨损. 处理步骤:更换损坏的部件.


  • [Troubleshooting] Gears slip or skip when reeling

    铸造Reesl: Drive gear, pinion Gear or spool pinion damaged. 更换损坏的部件.


  • [How To] How to Correctly Spool Up Braide line

    Okuma Product Development Manager John Bretza talks about the proper technique on how to spool up braided line.


  • [How To] Andros Leverdrag Cast Control Set Up

    Okuma Product Development Manager John Bretza talks us through getting our Andros leverdrag Cast Control all set up.


  • [如何]设置拖动杠杆卷轴

    尊龙旗舰厅app经常被问到如何在尊龙旗舰厅app的杠杆拖盘上设置预设拖盘. 这是一段视频由Okuma产品经理John Bretza解释这一功能.


  • [How To] Setting the Cast Control on your new Okuma Baitcast Reel

    Okuma Product Manager John Bretza explains how to really get dialed in on your new Okuma baitcast reel. With the internal breaking system, some fisherman don't know how to get in and make the adjustment.


  • [How To] Getting dialed in on the Makaira旋转 Drag System

    奥库马产品经理约翰·布雷扎告诉你如何得到预先设置的拖拽系统所有在新的Makaira纺车卷. 大隈继续用Makaira纺车重新发明大型渔猎, 提供独特的, advanced design and new levels of power and longevity. 这是一场令人惊叹的权力展示, Makaira combines forged and machined aluminum framing, 侧头和转子具有完整的锻造和加工不锈钢传动系统. 23个o形圈和垫圈完全密封阀体和从盐水中拖动系统. 说到阻力, a Micro Adjustable Power Drag offers a coarse pre-set, 具有60个制动点,可微调高达66磅的有效拖动到精确的输出. Two sizes include a 20,000 and 30,000 for discerning big game anglers.


  • 【尊龙旗舰厅app】大隈线柜台功能

    在最近一期的Okuma how to系列中,Okuma产品经理John Bretza为尊龙旗舰厅app提供了一些关于线路计数器是如何设计功能的深入见解.


  • [技术]交叉施工

    最新鲜的创新...来自大隈的三轮车具有独特的交叉结构. 尊龙旗舰厅app从铝结构和轻质石墨材料中汲取精华,在卷筒设计中创造了独特的新概念. The solid one piece stamped aluminum reel stem and rotor arm are paired with lightweight graphite side plates and a rotor housing which provides strength where needed, 尽可能的减轻体重.


  • [技术]纺纱机-双力拖动

    DFD结合了阀芯的两个表面,以最大化高端的阻力压力, 效率和整体平滑. 安装在阀芯顶部并受Hydro Block系统保护的是一个多盘毛毡拖动系统,该系统与安装在阀芯下方的二次拖动系统一起工作. 施加均匀的压力 to both surfaces of the spool for maximum stability.


  • [技术]杠杆拖动-双力拖动

    用于非常平滑和强拖动输出, Okuma的Makaira杠杆拖动设计具有专利的双力拖动系统. 这种牵引系统是专门设计的,安装在阀芯的右侧, 设计围绕一个拉杆拖动系统,使所有的机械工作在精确的对齐和地方没有压力的框架. 这个系统与一个定制设计的推力轴承一起工作, which alleviates side load at heavy drag settings.


  • [技术]C-40X

    Okuma的C-40X碳技术采用了一种特殊混合的石墨聚合物. The carbon fibers in this material are elongated and reinforced, 创造出比标准石墨材料更强的复合材料. 轻25%,1.5 times stronger and 100% anti-corrosive, C-40X translates into an extremely lightweight and durable 建设.


  • [Tech] TORSION CONTROL ARMOR®(柠檬酸™)

    Okuma’s TORSION CONTROL ARMOR® (柠檬酸™) is a breakthrough in reel design that provides a stronger, 更耐用的, 卷建设. 柠檬酸™ technology offers maximum stability by eliminating reel stem twisting and keeping gears aligned; giving the confidence you need in fighting the fish of a lifetime.


  • [技术]离心圆盘保释(CDB)

    大隈的离心圆盘保释(CDB)是一种独特的新设计,它包含了一个更重的黄铜圆盘,完美的加权和平衡,创造了一个更平稳和更容易的保释操作, 同时增加了整体保释功能的强度和稳定性.


  • [技术]旋流转子(CFR)

    Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air flow through the ported rotor. 这种经过彻底测试的设计允许在卷轴变湿时更快的干燥时间, minimizing corrosion possibility through out the reel. CFR还创造了一个更轻的重量和一个更刚性的转子,这减少了弯曲和旋转一致性,并创造了一个更精确的机械操作.


  • [技术]精密椭圆齿轮传动系统

    The Precision Elliptical Gearing System advantage boils down to one thing and one thing only – performance. By regulating the speed of the spindle stroke, 配备该系统的卷筒在卷筒上更一致、更均匀地绕线, 造成水平线铺设. This creates less friction during casting for increased distance, 更大的准确性, 更长的线路寿命, 也更流畅, 更均匀的阻力压力. 拿起任何配备了这个功能的小隈卷轴,并为自己感受平衡, 光滑性和动力性是精密椭圆齿轮传动系统的特点.


  • 【尊龙旗舰app】磁控系统(MCS)

    Okuma’s Magnetic Control System is a fully-sealed, 100%防水浇注控制系统,利用铸造过程中阀芯高转速旋转产生的磁场,减少间隙,提高铸造距离. 磁场受可调铸造控制磁铁的影响,该磁铁施加反作用力,允许进行微小而精确的调整.


  • [技术]机加工刚性框架

    Okuma's Machined Rigid Frame 建设 incorporates a one-piece fully-machined aluminum frame. 这些刚性棒库存铝框架是在精度校准和公差承受更多的压力和扭矩比任何其他材料在尊龙旗舰厅app的行业中使用的框架材料. Okuma features these anodized frames on fly reels, baitcast卷, lever drag reels and star drag 恶意破坏 reels.


  • [技术]防弹衣

    Okuma's stainless steel Body Armor eliminates the frame flex commonly found in graphite framed 恶意破坏 reels. This feature incorporates two large stainless steel rings that are mounted to both sides of the frame. 线束凸耳集成在防弹衣设计中,通过将压力重新分配到这些大直径环上,消除了通常施加在线束凸耳上的压力.


  • 【尊龙旗舰app】自润滑齿轮系统

    自润滑齿轮系统是在Okuma的高端星形拖曳轮上发现的一个特点. 在这个系统上的主齿轮采用了一个热敏油浸渍黄铜衬套,该衬套安装在齿轮的中心. This system releases oil if friction increases to keep the main gear and drive shaft running smoothly in all conditions. 大隈是第一家采用该技术的公司,该技术起源于大型机械行业,该功能已经过多年的时间测试.


  • [技术]XL杠杆

    在杠杆式拖曳和星形拖曳轮上都采用了XL传动装置设计,其中包含了一个超大的齿轮箱,该齿轮箱具有放大的传动系统和放大的拖曳系统. 该系统的阻力表面积比标准的齿轮箱设计要大50%以上. 齿轮系统, the major advantage is that the gear teeth are substantially larger, 允许更多的强度和起动功率. This is how we are able to offer a high-speed gear ratio reel without sacrificing cranking power. Our XL gearing system essentially turns your reel into a winch.


  • 【尊龙旗舰app】速度LOC小齿轮系统

    SLG技术在星形拖盘上采用了双级小齿轮系统,允许在极端高速下进行积极啮合. The SLG system allows for instant gear engagement when engaging from freespool to strike at speeds in excess of 50 MPH.


  • [技术]机械稳定系统(MSS)

    Strong, 稳定的, 平滑-奥隈研吾的机械稳定系统是一个支持系统,绑轴, 小齿轮, 小齿轮轴承, drive shaft and main gear together with a single support system. While other reels on the market offer minimal or no gear stabilization, 这种专利的Okuma设计允许所有这些关键部件保持精确的对齐. 专为满足编织和钢丝钓鱼的要求而设计, MSS支撑系统在3个关键应力点上稳定了轴,消除了压力下的弯曲,这直接转化为更耐用的卷筒, 比竞争更强、更平稳.


  • [技术]宽口水平风

    这种重型, stainless steel levelwind is Titanium coated and built to withstand the punishment of braided and wire lines. The guide has been designed with an increased opening to insure proper knot clearance when fishing with double lines. This wide space allows for Albright or similar connection knots, as well as swivels and copper line to pass through the guide easier and be wound directly on the spool.


  • [技术]丁字架处理

    t型手柄:t型手柄的专利设计提供了真正符合人体工程学的正确角度,以确保钓鱼者获得最大的力量和最小的疲劳. t型杆充分利用了人手的自然动力学, wrist and forearm to help sustain power and endurance for the angler.


  • [技术]好球区

    Okuma的好球区线计数器系统包含了一个机械计数器,可以根据线轴转数精确测量线. These counters measure in feet and are calibrated at the factory to be most accurate with a full spool and monofilament lines.


  • [技术]因此控制

    The Ergo Grip handle knob is an extremely comfortable oversized handle-knob design for both speed and power. 这种柔软的触摸旋钮已符合人体工程学设计,适合在你的手的手掌,将发现在某些Okuma杠杆拖动卷轴, star drag reels and some spinning reel models.


  • [技术]2-Speed传动装置

    Okuma的双速技术包括两套不锈钢主齿轮和小齿轮, allowing anglers the option of a high-speed gear ratio or a powerful low-speed gear ratio for maximum power and torque. 换档很简单,只需按下一个按钮或弹出一个带有小隈独特换挡设计的杠杆,就可以获得你想要的合适的齿轮传动比.


  • [技术]河马

    河马抓地力是一种独特的卷筒夹设计,可在海上捕鱼时提供三重职责. 这种重型, 锻造铝卷钳,安全地支持您的卷杆最大的安全. This clamp also incorporates a small hole that was designed to be used with a safety line for 恶意破坏. 在夹子的后面是一个大直径的孔,被设计用来作为触发器. The large hole should be mounted facing the butt of the rod.


  • 【尊龙旗舰app】耐腐蚀涂层(CRC)

    耐腐蚀涂层结合Okuma的专有HDG-II传动系统, 与标准齿轮相比,提供了特殊的抗腐蚀性能, with a coating of Corrosion X HD to all internal and external parts. The CRC process actually penetrates and bonds to the metal, which helps significantly toward long term protection.


  • [技术]Baitfeeding系统

    Okuma's patented baitfeeding system allows anglers to disengage their spinning reel spool and allow their bait to run freely. 诱饵饲喂系统在卷取机的尾部合并了一个二级微调节拖动系统,允许精确调整卷取机的诱饵控制. In order to disengage this system simply turn the handle. 在卷轴的后方的开/关杠杆将自动脱离诱饵饲喂系统,所以你可以与主拖动系统打你的鱼.


  • [技术]ALG

    With today’s super braided lines and lighter more compact reels, ALG为垂钓者提供重量更轻的齿轮,而不影响强度和耐久性. 增加他们的寿命, ALG gears are anodized to hold up to the elements much better than traditional gearing materials.


  • [技术]HDGII

    Okuma的专有高密度传动装置II采用了一种具有特殊防腐涂层工艺的超强合金成分. 其结果是高密度, 耐腐蚀的齿轮是用来处理苛刻的元素和残酷的压力施加在卷筒内部齿轮系统.


  • [技术]快凝

    This system allows for instant handle engagement and eliminates all handle back play commonly found in many reels. 这是通过使用耐腐蚀的不锈钢滚柱轴承来完成的,在一个方向上为岩石坚固的挂钩套卷轴.


  • 【尊龙旗舰app】铝石框架结构

    铝石结构结合了Okuma的刚性铝车身技术在纺丝, 拖网和飞盘设计. 铝框架更强,更刚性,能够承受更多的压力和扭矩比传统石墨框架. 这些轻量级, 压铸铝框架提供更精确的公差,为精密齿轮校准, 最大的浇注性和最终的耐久性.


  • [技术]RES II

    The RES II System stands for Rotor Equalizing System. This second-generation RES System incorporates a computer-balanced weight precisely placed in the rotor. This weight allows for precision balance and eliminates all spool wobble for perfect alignments and smooth cranking.


  • [技术]水电块

    液压块设计的特点是橡胶垫片安装在纺纱卷筒的顶部. 这种橡胶密封可以阻止水和外来物质进入阻力系统. 水力块系统,确保您的拖式垫圈始终执行在最佳水平.


  • [技术]均匀流辊系统(EFR II)

    The Even Flow Roller System utilizes a ball bearing under the line roller to maximize efficiency. 该滚轮通过在滚轮上自由滚动而无摩擦,有助于减少线的扭曲. Without this system, line will naturally twist when drag is pulled.


  • 【尊龙旗舰app】高性能滚珠轴承

    The balls used on the HPB's are constructed from the same high-grade stainless steel material as the bearing housing. These bearings were designed to be more than 10 times more resistant to saltwater than standard stainless steel bearings. These bearings may even outlast the angler himself.


  • [技术]速度控制系统

    速度控制系统是可调的, 6-pin centrifugal braking system for precision spool control. Weights can be adjusted IN or OUT for additional spool control. Positioning the weights in toward the spool allows for more freespool, 当调整引脚离开线轴允许更多的控制. 垂钓者可以交替称重,直到找到最佳的平衡.


  • [技术]线轴接入端口

    这种独特的新设计可以在小隈的低姿态诱饵卷轴上找到. 阀芯访问端口允许快速访问阀芯,只需滑动锁/解锁手柄对面的侧板. 该系统允许快速更换线轴, 但更重要的是,它允许快速访问调整速度控制系统.


  • [技术]MAXGEAR®

    Okuma’s Makaira spinning reels are in a class of their own, 以锻造不锈钢为特色, 加工MAXGEAR®. While the majority of reels in this category feature bronze, aluminum or simple machine cut stainless steel gears, Makaira的一流的主要齿轮是机器切割锻造不锈钢. We ported the main gear and incorporated other design elements to keep it light weight enough for you to fish all day. No compromises were made in the internal design of MAXGEAR®. 小齿轮和热处理的线轴是17-4级机器切割不锈钢. They are rust proof and were optimized to work with braided line and the reels high-output drag.